 |
|
|
|
 |
 |
 |
|
Quality Japanese Koi & Unique Affordable Pond Construction
|
 |
Evolution Aqua Nexus Eazy 300
|
 |
Evolution Aqua is known for it's ground breaking filtration systems, that is why we as so proud to be an Evolutuion Aqua Authorised Dealer, so we can bring you products like the brilliant Cetus Sieve Filter.
The Cetus Sieve Filter
300 MICRON SIEVE screen on 100% of surface area
The Cetus sieve is a totally new, bow screen pre-filter, made using the latest rotational molding technology. With all of its benefits and build quality, it is undoubtedly the best of its kind on the market today, regarding quality and performance! It is designed to efficiently and effectively remove large amounts of mechanical waste from a pond. It can be set-up gravity OR pump fed and has many benefits over the original bow screen technology.
This Cetus has a variable inlet height using the unique patented Pondflow regulation system – for use when gravity fed. This allows water levels within the pond to drop without causing the circulating pump to be starved of water. The Cetus will allow a skimmer or a bottom drain to accept vast amounts of waste without excessive cleaning needed to be carried out. The water must then be pumped to either a normal filter above pond level (Nexus Eazy/Eazy Pod) or to a pressurised filter.
If pump fed, the sieve is placed above pond water level and then the exit water is gravity dropped into your main filter.
It is advised that all pressurised filters be pre-filtered using a Cetus to reduce excessive backwashing and maintenance due to heavy solids.
Main Benfits
 Can be gravity OR pump fed
Perfect fit screen so no waste can bypass
Totally reliable and simple to install
Plug and Play – comes with flexible boots to connect to pipe work
Greatly reduced backwashing / maintenance of pressurised filters
Robust one piece mould –no welded joints – no leaks!
Large waste collection area which slopes to sump outlet
Ideal for mechanically filtering skimmer lines
Patented float that gives constant flow for gravity-fed level fluctuations
Maximum flow rate 18,000 litres per hour
Tri-slot 300 micron wedge wire screen in 316L stainless steel on 100% of surface area
Increased levels of oxygenTechnical Specification
| Max Flow: |
18,000 litres/hr, 4,000 gallons/hr |
| Inlet: |
gravity 110mm/4 inch pump 50mm/ 2 inch |
| Height: |
945mm |
| Outlet: |
gravity 40mm/1.5 inch pump 110mm/ 4 inch |
| Length: |
850mm |
| Width: |
570mm |
| Outlet Waste: |
90mm/3 inch |
| Screen: |
300 micron |
Photos
Only £499 (gravity feed)
Only £525 (pump feed)
Warning
Any electrical wiring in and around ponds must installation by a qualified electricain. Electricity and water do not mix please be careful. If you need any help on how to install this unit or need to find a reputable workman in your area please call 0871 874 0239.
|
|
 |
|
 |
|
| |
|
©2003-2006
The Nishikigoi Centre •
Conditions of Use •
Copyright • Privacy Policy |
